Woodturner PRO Release Notes

Version 1.0.3.0
* Top most and Bottom most row's now display Wall Width's in the popup. The largest possible wall width is displayed.
* Cutting summary: Lower Outside and Upper Outside diameter column changed to "Diameter" and od, id, uod, lod added to the legend. This column was causing a lot of confusion because it was being used differently depending on the segment type.
* The grid lines now display using two shades of green and are allowed on the segment & ring view now as well as the cutaway.

Version 1.0.2.9
* Added ZOOM control for Cutaway, Ring, and Segment views.
* Added Keyboard help item in the help menu.
* Now makes an intelligent guess during install to default unit of measurement (metric/inches) by interrogating the timezone that the system is in.
* An error during the transfer from 3DP to WTP when units were set to Metric has been fixed.
* Increased authcode grace period.
* Updated the help file.

Version 1.0.2.8
* Printing: The ring and segment view now prints things that span the page width (not just height) on to extra page(s)!
* Added Ctrl-UP and Ctrl-Down arrows to adjust the height of a segment. If the shift key is pressed in conjunction with these keys, it will increase the amount of adjustment made.
* Added FILE/Unlock Software menu item (menu item is hidden once software is unlocked).
* Removed auto-launch to WTP website and changed "Purchase" button to "Authorization Code"

Version 1.0.2.7
* Integated with 3D Design PRO (new menu items, toolbar buttons, and IPC).
* Added vertical spacer representation to the ring view.

Version 1.0.2.6
* Project can now be compressed by checking the "Compress File" checkbox under the "Project/Project Properties" menu item.
* Compressed the "Kevins round bowl" sample project.
* Added ability to show/hide hover boxes via a new toolbar item and the "View/Show hover boxes" menu item.

Version 1.0.2.5
* Some people reported seeing "elvish" used in the cutting summary. We performed a usability study and found that a significant portion of our customer base is not literate in the elvish language. After studying the data carefully, we picked an option going forward most beneficial to our customers: We now specifically ask windows to use the "Arial" font when displaying the cutting summary instead of letting the operating system pick a font by itself.

Version 1.0.2.3
* The trial period is shortened from 90 days to 30 days. All features, including print and save, are now unlocked during the trial period.
* Ring View: Fixed a problem where the segment numbers would not be centered inside of the segment when just a few segments made up the entire ring.
* The "File/Options..." menu now allows custom wood species to be created. Both the name and color of the custom species can be defined and are stored for later use. The custom species are also included in WTP project files when they are used; thus, project files that use custom wood types can be distributed to other systems.
* New species added: Cherry, Hickory, Cypress, Hackberry, Poplar, Sassafras, Sycamore, Willow, Cottonwood, Gum.

Version 1.0.2.2
* Solves a problem introduced in version 1.0.1.0 that would cause the application to crash when printing the cutting summary on windows 98 machines.

Version 1.0.2.0
* New Segment type: Open Segment. This new segment should be used for creating Flat Open Segments. The Ring view introduced in version 1.0.1.0 is ideal for lining up the open segments in the ring.
* Cutaway popup and ring view summary now shows Board Length.

Version 1.0.1.0
* Metric measurements now use millimeters instead of centimeters.
* New species type "See Instructions" displays with the same color as Ash.
* A new "Ring View" was created that can be used for creating templates for use with the Johnson Jig. The "Ring View" also displays more calculations for each segment type.
* Plan names are now displayed in the cutting summary.
* Cutting summary now has headers and smarter page breaks when printing to a printer.
* Swapped the order of the Upper Outside Diameter and Lower Outside Diameter in the dimensions dialog bar.
* Right clicking on an instruction now offers a new menu item: "Replace"
* The cutaway view now draws a more precise Stave and Compound.
* A new pop-up summary appears when the mouse hovers over a row in the cutaway view.
* Changes the compound mitered board width from calculating angular surface width to true board width.

Version: 1.0.0.8
* The File/Options menu now has the ability to change various degrees to degrees from 90 instead of degrees from 0.
* Saw kerf is now displayed in metrics when requested
* Cutting summary is now displayed in reverse order (top row first)
* The order of the items in the project window has been changed to Photos, Plans, Instructions, and Credits
* The project window has been expanded
* Single clicking an item in the project window now performs the associated view action.
* If they exist, project photos are now displayed first instead of project plans.
* This version will reset the trial period of previous versions.

Version 1.0.0.7
* Install now detects if an older version is already installed on the system. If an older version already is installed, it will automatically upgrade it.
* Support for displaying values as metric centimeters under File/Options
* Fixed a problem where the lower segment edge length on a stave might be cut off

Version 1.0.0.6
* Newlines were sometimes represented by special characters in the ProjectProperties/Comment edit box. This has been fixed.
* Fixed division by zero error that was causing Win 98 machines to crash.
* Put in some more sanity checking. Compound segments with a slope of 90 should no longer cause win 98 machines to crash.